AQUA Splash
The pool machine
Service-friendly and efficient. Ideal to start off with.
- Pools with 20 – 30 m³
- Performance 4 – 6 m³/h
- 0.18 – 0.25 kW
- Non-self-priming
- Made in Germany
APPLICATION AREA
The Aqua Splash is a powerful non-self-priming pump for small filter units. As with all Aqua TechniX pool machines, the Aqua Splash is ideal for domestic use. Due to its simple connections and handling it is especially suitable for starter pools:
- aboveground pools
- partially submerged pools
- built-in pools
- whirlpools
You will find more information regarding the various pool types here.
MATERIALS
The Aqua Splash has a powder-coated motor and is corrosion resistant against swimming pool water and chemical additives. All housing parts are made from reinforced plastic, resistant to chlorine, and promise a long service life. Installed in the open, the pump should have simple protection against the effects of the weather.
FEATURES
- High performance and extremely smooth running
- Minimal energy consumption
- Delivered ready for connection (standard network with 230 V)
- Standard 1 1/4″ or 1 1/2″ hose connections (simply attach to the pump using hose clamps)
- Low-wear materials
- Integrated strainer tank
- Extremely dirt resistant
- Powder-coated motor
- Non-self-priming pump, thus installation below the water level (more information in the Pool Academy)
SAFETY
The Aqua Splash is based (as all Aqua TechniX pumps) on the principle of electrical separation. Thus the pump/motor shaft has no contact with the pool water.
TECHNICAL DATA AND PRODUCT DETAILS
Design |
Pool size |
Flow rate… |
…at a dynamic head* of |
Power output P2 |
Sound level |
|
Splash 4 |
20 m³ |
4 m³/h |
6 m |
0.18 kW / 230 V |
55.7 dB |
|
Splash 6 |
30 m³ |
6 m³/h |
6 m |
0.25 kW / 230 V |
56.3 dB |
|
*Detailed performance parameters can be found in the performance curve
Pump designs |
Min. ∅ filter vessel (mm) at 50 m/h filter speed |
|||||
Splash 4 |
Sand filter AQ 280, 330, 400* |
|||||
Splash 6 |
Sand filter AQ 280, 330, 400* |
|||||
THE HIGHLIGHTS IN DETAIL
DIRT TRAP
The integrated strainer tank makes the Aqua Splash extremely dirt resistant, as it prevents coarse dirt particles from entering the impeller of your filter pump. You should clean the pre-filter basket at regular intervals. Only then can your sand filter perform optimally and ensure the water quality of your pool.
You will find important information and tips for clean pool water in the Pool Academy.
VISION PANEL
The Aqua Splash has a vison panel on the strainer tank. Thus you see immediately if the tank needs cleaning.
If you want to learn more about pool cleaning, take a look at this article in the Pool Academy.
SIMPLE SET-UP
The installation of the Aqua Splash is super easy. It has standard
1 1/4″ or 1 1/2″ hose connections. The pool hoses are simply attached to the pump using hose clamps. It couldn’t be less complicated!
Are you interested in the general construction and function of a pool pump? This article in the Pool Academy is just for you.
PLUG & CLEAN
The Aqua Splash fits perfectly with the AQ sand filter units. The pump is simply connected with the filter unit using hoses – plug and play or rather plug and clean!
There’s more information regarding useful pool cleaning in the Pool Academy.
YOU MIGHT ALSO BE INTERESTED IN THESE POOL MACHINES
AQUA Mini
Small, robust and dirt resistant.
Ideal to start off with.
AQUA PLUS
Self-priming with flexible screws.
For every project.